This is a static archive of our old Q&A Site. Please post any new questions and answers at ask.wireshark.org.

VLAN Tagging Intel 82579LM and Wireshark 1.8.3

0

Hi all, I'm use wireshark 1.8.3 and a dell E6410 with intel 82579lm network adapter. I can't see any vlan information in a capture although I have configured tagging in the networkcard settings and the networkconnection is working very well. What I have to do in addition? Greetings Hartmut

asked 04 Nov '12, 07:29

Hartmut's gravatar image

Hartmut
6113
accept rate: 0%

edited 27 Dec '12, 04:04

Jaap's gravatar image

Jaap ♦
11.7k16101


One Answer:

2

Please check the answer of @KeithFrench in the following question.

http://ask.wireshark.org/questions/1983/vlan-capture-setup-for-intel-network-card

It's about a the driver parameters MonitorMode and MonitorModeEnabled in the registry.

Additionally check also the explanation of Intel about this issue:

http://www.intel.com/support/network/sb/cs-005897.htm

See also here:

http://dot1x.blogspot.de/2010/03/sniffing-dot1q-tags-with-wireshark.html

If that does not work, please check my answer in the following question:

http://ask.wireshark.org/questions/14075/can-not-see-packets-from-local-machine

Regards
Kurt

answered 04 Nov '12, 11:58

Kurt%20Knochner's gravatar image

Kurt Knochner ♦
24.8k1039237
accept rate: 15%

Hello Kurt Thank you, now it works fine. Regards Hartmut

(07 Nov '12, 05:32) Hartmut

@Hartmut,

If the answer has solved your problem please accept the answer by clicking the checkmark icon next to the answer. This allows other users to easily see which questions have good answers.

(07 Nov '12, 05:39) grahamb ♦

@Hartmut: What did you change? MonitorMode or MonitorModeEnabled?

(07 Nov '12, 08:19) Kurt Knochner ♦