This is a static archive of our old Q&A Site. Please post any new questions and answers at ask.wireshark.org.

Checksum offload info from out-of-band data of a captured packet

0

Hi There

Does Wireshark/WinPCAP capture and show the checksum offload info from the out-of-band data?

Thanks Arun

asked 12 Oct '10, 10:22

Arun's gravatar image

Arun
1111
accept rate: 0%

Hi Arun - can you be a bit more specific regarding which out-of-band data you are interested in? If the out-of-band data is carried in a packet and it is passed up to Wireshark, then you should be able to see it. There is some out-of-band data that does not actually cross the network, but is used between a driver and protocol stack, hence the question for clarification.

(12 Oct '10, 21:20) lchappell ♦

Hi

Thanks for the quick response. Sorry I should have been more clear. This is about the out-of-band data used between NIC driver and protocol stack. Specifically I want to find out if a Checksum offloading adapter/driver said good checksum or bad checksum for an incoming packet.

Thanks Arun

(12 Oct '10, 22:15) Arun

One Answer:

0

I'm going to guess a big No on this one. Dropped packet stats may be recorded by the driver somewhere - but those communications are probably not seen by wireshark. Its kind of against the point to have an offloading NIC report back to the CPU when it drops a packet...

answered 13 Oct '10, 11:01

GeonJay's gravatar image

GeonJay
4705922
accept rate: 5%