I am not able to see any ROHC fields on applying filter pdcp-lte. I tried the filter pdcp-lte.rohc but no messages showed up on applying this filter. Is there any separate dissector for ROHC decoding, apart from the standard pdcp-lte package? I am using wireshark verion 1.4.0 on linux. asked 22 Feb '13, 06:33  dr1 |
One Answer:
PDCP LTE dissector did include some ROHC dissection in Wireshark 1.4.0 (while starting from Wireshark 1.8.0, ROHC is a separate dissector), but you must activate ROHC options in PDCP-LTE preferences. answered 23 Feb '13, 02:31  Pascal Quantin any idea how to activate the ROHC options in 1.4.0?? (27 Feb '13, 02:31) dr1 Edit -> Preferences -> Protocols -> PDCP-LTE -> Attempt to decode ROHC data. Note that ROHC support is only partial. (27 Feb '13, 08:49) Pascal Quantin I already enabled this preference but I still cant see the ROHC message. (Though it is a compressed profile 1 packet) (27 Feb '13, 21:57) dr1 Is there any tweaking required in the wireshark code? (27 Feb '13, 21:57) dr1 According to the source code of 1.4.0, the PDCP LTE dissector is just able to identify that it is a type 1 packet without dissecting it. And it will only work if the PDCP LTE dissector is called from the DCT2000 dissector so as to set the PDCP info structure. By using Wireshark development version (https://www.wireshark.org/download/automated/) you will be able to perform a better dissection, especially if your capture contains the IR packet. Profiles supported are uncompressed, RTP/UDP/IP and UDP/IP. If you can share your pcap file, it would allow to enhance the ROHC dissection if needed. (27 Feb '13, 22:18) Pascal Quantin |
You should probably try a development release or at least 1.8