This is a static archive of our old Q&A Site. Please post any new questions and answers at ask.wireshark.org.

Remote interface Not Able to connect

0

I am Trying to connect My PABX in wire shark using Remote Interface with Port number 5060 , But It's not connection .

Can any one help me , how to connect PABX network card.

asked 19 Apr '13, 17:15

Raamc's gravatar image

Raamc
1●1●1●1
accept rate: 0%

One Answer:

0

You need to start rpcapd on the remote machine (if it is a windows system). See the following article.

http://www.winpcap.org/docs/docs_40_2/html/group__remote.html

In your case, you need to configure rpcapd to listen on port 5060. However, please see my hints.

HINTS

  1. I'm not sure if it is possible at all to run rpcapd on your PBX system.
  2. If the system that runs rpcapd is a VoIP PBX, port 5060 could be used by the SIP Listener. In that case it's not a good idea to run rpcapd on that port.
  3. If your PBX system is linux based, please have a look at the following question: http://ask.wireshark.org/questions/13217/remote-packet-capture-on-remote-linux-machine
  4. If your PBX system is a proprietary system, then you can't use the remote capturing feature.

Regards
Kurt

answered 20 Apr '13, 05:04

Kurt%20Knochner's gravatar image

Kurt Knochner ♦
24.8k●10●39●237
accept rate: 15%

edited 20 Apr '13, 05:39