This is a static archive of our old Q&A Site. Please post any new questions and answers at ask.wireshark.org.

PC AND SSN IN SCCP message decode wrong

0

Hi

I am experience a decode issue , When i take a look at the Calling Party Address in SCCP message. It showed ,PC=7420,ssn is unknown ,the code showed 43 fc 1c 73 02, it should decode like 02-73-1c,ssn=252,check the preference of MTP3 already modify to ANSI.

Not sure how to fix this issue.

asked 15 May '13, 07:48

peter%20c's gravatar image

peter c
1111
accept rate: 0%


One Answer:

0

Hmmm, if it is showing you "PC=7420" then it really looks like the MTP3 dissector thinks it is running ITU.

Oh, well, the other problem (if this is supposed to be ANSI) is that the high-order ("reserved for national use") bit in the Address Indicator is not set. That means, in ANSI, that the address is coded to international (meaning: not ANSI) standards. If you're using a modern Wireshark there should be an expert info warning about the unusualness of that...

I suspect that's the problem: either it's not really ANSI or that high-order bit is wrong.

answered 16 May '13, 07:06

JeffMorriss's gravatar image

JeffMorriss ♦
6.2k572
accept rate: 27%