This is a static archive of our old Q&A Site. Please post any new questions and answers at ask.wireshark.org.

Decode IuB Trace

0

Hi,

In the given trace present at pcapr, I was able to decode nbap, but most of the FP/MAC/RLC packets are throwing exceptions. Is it possible to see the RRC packets with any particular settings??

http://www.pcapr.net/view/nos/2011/3/1/13/iub_over_udp_nbap_and_rrc.html

Regards, Vineeth

asked 24 Jan '14, 03:09

Vineeth's gravatar image

Vineeth
1111
accept rate: 0%


One Answer:

0

FP/MAC/RLC are automatically dissected. But beware that UMTS security design is not allowing to see Iub messages after cyphering (i.e. authentication and security procedure right after RRC Connection Setup Complete and Direct Transfer messages to Core Network) if encryption algorithm is activated in Core Network. Check that first, and then verify that EA1 is not used, then you should be able to see RRC protocol.

answered 14 Jan '15, 01:09

Fedemone's gravatar image

Fedemone
111
accept rate: 0%