Hi,
I've question about QOS decoded message. why for Delivery order below become "Streaming Class" ? not Without delivery order ('no'), the number I trace subscribed with Streaming Class.
GSM A-I/F DTAP - Activate PDP Context Accept
Protocol Discriminator: GPRS session management messages
1... .... = TI flag: allocated by receiver
.000 .... = TIO: 0
.... 1010 = Protocol discriminator: GPRS session management messages (10)
01.. .... = Sequence number: 1
DTAP GPRS Session Management Message Type: Activate PDP Context Accept (0x42)
0000 .... = Spare bit(s): 0
.... 0011 = LLC SAPI: SAPI 3 (3)
Quality Of Service - Negotiated QoS
Length: 14
00.. .... = Spare bit(s): 0
..00 1... = Quality of Service Delay class: Delay class 1 (1)
.... .011 = Reliability class: Delay class 3 (3)
1001 .... = Peak throughput: Up to 256 000 octet/s (9)
.... 0... = Spare bit(s): 0
.... .001 = Precedence class: High priority (1)
000. .... = Spare bit(s): 0
...1 1111 = Mean throughput: Best effort (31)
011. .... = Traffic class: Interactive class (3)
**...1 0... = Delivery order: Streaming class (2)**
.... ..11 = Delivery of erroneous SDUs: Erroneous SDUs are not delivered('No') (3)
Maximum SDU size: 1500 octets (150)
Maximum bitrate for uplink: 8640 kbps (254)
Maximum bitrate for downlink: 8640 kbps (254)
0111 .... = Residual Bit Error Rate (BER): 1*10-5 (7)
.... 0100 = SDU error ratio: 1*10-4 (4)
1000 00.. = Transfer delay: 1000 ms (32)
.... ..01 = Traffic handling priority: Priority level 1 (1)
Guaranteed bitrate for uplink: 0 kbps (255)
Guaranteed bitrate for downlink: 0 kbps (255)
000. .... = Spare bit(s): 0
...0 .... = Signalling indication: Not optimised for signalling traffic
.... 0000 = Source statistics description: unknown (0)
Maximum bitrate for downlink (extended): 21 Mbps (79)
Guaranteed bitrate for downlink (extended): Use the value indicated by the Guaranteed bit rate for downlink (0)
Thanks
asked 04 May '11, 07:06
ipoenkt
16●1●1●2
accept rate: 0%